After flying in space for more than two years, NASA’s spacecraft OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, Security-Regolith Explorer) recently reached and entered into orbit around its target, the asteroid Bennu. Asteroids like Bennu are considered to be leftover debris from the formation of our solar system. So, in the first mission of its kind flown by NASA, OSIRIS-REx is looking to retrieve a sample and bring it to Earth.
In addition to several instruments onboard the spacecraft is an MIT student-built one called the REgolith X-Ray Imaging Spectrometer (REXIS), which will provide data to help select the sampling site, in addition to other mission objectives, which include characterizing the asteroid and its behaviors, and comparing those to ground-based observations. REXIS is a joint project between the MIT Department of Earth, Atmospheric and Planetary Sciences (EAPS); MIT AeroAstro; the Harvard College Observatory, MIT Kavli Institute for Astrophysics and Space Research; and MIT Lincoln Laboratory.
Shortly after arriving at Bennu, OSIRIS-REx researchers announced that they had identified water on the asteroid, possibly impacting selection of the sampling site.
EAPS speaks with Richard Binzel – an expert on asteroids at MIT and co-investigator on this mission, leading the development of REXIS—about the instrument’s role in the mission and what this finding means for the future use of similar devices. Binzel is also professor of planetary sciences in EAPS with a joint faculty appointment in AeroAstro, and Margaret MacVicar Faculty Fellow.
Q: What is the purpose of REXIS, as part of the OSIRIS-REx mission?
A: The goal of the OSIRIS-REx mission is to obtain a pristine sample from the surface of the asteroid, Bennu, that has some of the most original, surviving chemistry from the very beginning of our solar system. The asteroid is like a time capsule, which is going to tell us what the condition of our solar system was like when it formed 4.56 billion years ago.
The goal of REXIS is to map the composition of Bennu in support of the mission, choosing the location for that sample.
The objective is to go to the asteroid and spend up to a year studying it in detail to determine what location can give us the highest scientific return. It is a matter of progressive evaluation and characterization of the asteroid: we will undergo orbits that gradually go lower to the point where we see the surface in extremely good detail—like the characteristics of craters and boulders. In this way, we know where we're going to touch the surface, grab a sample, and bring it safely onboard the spacecraft.
To do this, onboard OSIRIS-REx, there's a suite of instruments: visible cameras and spectrometers mostly in the visible and near infrared wavelengths that are mapping the asteroid’s surface, in addition to MIT’s REXIS, the REgolith X-ray Imaging Spectrometer. REXIS complements all the other instruments and contributes to the rest of the data by seeing in X-ray light. No other instrument on OSIRIS-REx will see the surface in X-ray light. So, this is quite unique in planetary exploration, and the fact that it was built by students is even more amazing.
One of our objectives is to corroborate the mineral mapping that's done by the other instruments. The visible and near infrared spectrometers are sensitive to the mineral composition of the surface, and REXIS measures the individual atomic elements that are present. One of the things that we want to accomplish is to see whether the atomic elements that we measure are consistent with the minerals that the other instruments are measuring and vice versa.
Q: How does REXIS work?
A: REXIS works by taking advantage of the Sun’s X-ray emissions. Some of those X-rays hit the asteroid and interact with the atoms on the surface: they get absorbed and change the electron energy level in the atoms. When the atoms return to their ground state, they emit an X-ray photon, which means the X-rays from the Sun caused the asteroid to glow or fluoresce.
REXIS measures the energy and the locations of the X-rays that are fluorescing away from the asteroid surface, and the energies tell us which atoms are present. The energy of an X-ray photon that gets emitted by an atom corresponds exactly to the energy between two electron orbitals. Every atom has its own unique signature of energy states, so we can deduce the elemental composition of the surface of the asteroid.
We're going to be looking for things like iron, silicon, oxygen, and sulfur—some very basic building blocks of planetary bodies. We'll be able to measure those abundances and determine the composition of this asteroid.
Now, we are performing all sorts of calibration measurements, and we're learning about the characteristics of the instrument in space: ways that it's working as expected and differences. It's part of the instrument design to monitor the Sun's output and calibrate the asteroid observations, taking into account any variation from the Sun. REXIS has two parts to it: one part is the main spectrometer that is measuring the X-rays emitted from the asteroid surface. The second is a small solar X-ray monitor or SXM, and it is constantly looking at the output of the Sun, which varies over timescales of minutes, hours, and days. This way, if we are looking at one location on the asteroid and we see this enormous X-ray fluorescence, we'll know whether it's the asteroid that's special in that location, or whether it was just a solar flare, which happened to be occurring at the same time. We're also looking at the cosmic X-ray background or CXB and calibrating our instrument's sensitivity by looking at a steady, strong X-ray source in the sky called the Crab Nebula.
We also calibrate REXIS measurements against laboratory measurements of meteorites, and we're going to be able to pinpoint which meteorite type Bennu is most like. If we see any variation across the surface, we'll be able to say which regions have the most similarity to known meteorites, and this can guide us as to where we get our sample.
This series of images taken by the OSIRIS-REx spacecraft shows Bennu in one full rotation from a distance of around 50 miles (80 km). The spacecraft’s PolyCam camera obtained the 36 2.2-millisecond frames over a period of four hours and 18 minutes. (Credit: NASA/Goddard/University of Arizona)
Q: NASA announced that they found evidence of water on Bennu. What does this mean for REXIS and where the sample is taken from?
A: The OSIRIS-REx mission found evidence for the presence of hydrated minerals on the surface of the asteroid Bennu. These minerals form when water molecules react with rocky material and become part of the crystal structure. Meteorite studies suggest that this process occurred very early in solar system history. This discovery tells us that Bennu’s surface has not been heated to temperatures high enough to break down these minerals and release the water. Bennu appears to contain this primordial water, providing clues to how such material was delivered to Earth, leading to a habitable world.
This is enticing news for REXIS because one of the atomic elements we are going to be searching for is oxygen, which of course is a major constituent of water, and REXIS has the potential to confirm the finding of these water molecules in the minerals of Bennu.
A lot of factors go into the decision of where to sample. First of all, we have to determine which parts of the surface are safe to go to, that we know the spacecraft can navigate, get a sample, and come back safely. Then out of all the safe regions, which ones are the most scientifically interesting—based on what we call the science value map. The objective is to have a complete understanding of the composition of the asteroid’s surface and any variability. Then, we want to find a place to sample that we think has the most original organic chemistry from the beginning of the solar system, and so places on Bennu that may have a signature of water would be very interesting to sample.
Currently, we're still pretty far from the asteroid and slowly advancing to lower orbital distances. We will reach the orbital distance for REXIS to begin its science operations this coming June. Then, REXIS will fingerprint the composition of the asteroid in terms of its atomic elements. When we get the sample back, we'll be able to check whether REXIS got it right. If we did, it means that we can send a REXIS-like instrument anywhere in the solar system and get a reliable fingerprint of the detailed composition of what these objects are made of.
If REXIS is successful, it shows that with a small instrument you can get big science. Our nickname for REXIS is, "the little spectrometer that could."
Story Image: This mosaic image of asteroid Bennu is composed of 12 PolyCam images collected on Dec. 2 by the OSIRIS-REx spacecraft from a range of 15 miles (24 km). The image was obtained at a 50° phase angle between the spacecraft, asteroid and the Sun, and in it, Bennu spans approximately 1,500 pixels in the camera’s field of view. (Credit: NASA/Goddard/University of Arizona)